SURVEYOR 4B Controller (SV4B)
WHY CHOOSE BE ATEX
- Re-calibrate of gas detection equipments
- Check and verify of all PPE equipements
- Customised configuration of all devices
The affordable single-channel din-mounted control panel for the detection of flammable gases.
The Surveyor 4B is equipped with a small box that can be snap-fastened onto a standard symmetrical DIN rail: it is easy to install in an electrical control cabinet.
This control panel – which does not have a display – was designed as a detection solution for small boiler plants and battery charging rooms. The Surveyor 4B is an efficiant way to equip your facility at low cost.
0.4A (detector connected) @12 Vdc
Type 1 and 2: EN50270-06, EN 61010-1:10
- Available inputs: one available input, for bridge detectors only (340mA)
- Nominal voltage: (11.5 to 14V) on external power supply
- Current available on the channel: 11A
- Relays: Relay 1: common to gas and fault / Relay 2: gas, RCT relay 1 (fail safe) / RCT relay 2
- Max. interrupting rating: 60VA or 28W (resistive charge)
- Alarms per channel: two alarm levels (Al1, Al2) + Fault
- Programming: manual or automatic alarm acknowledgement
SURVEYOR 4B Controller (SV4B) - User reviews
Add a review & rate this product
* required fields